紫外分光光度法测定含吡啶盐型共聚物的阳离子度

报道了用紫外分光光度法在268nm处定量测定含吡啶环的高分子共聚物中吡啶环的含量,据此计算出该共聚物的阳离子度。实验结果表明:共聚物的阳离子度随着疏水碳链的增长而逐渐减小;同时与高聚物的阳离子度测定的经典方法———AgNO3法进行了比较,结果表明:对于含有吡啶环的高聚物的阳离子度测定,对于含有共轭体系的高聚物的分析如阳离子度的测定和对具有特征紫外吸收体系的含量测定等,紫外分光光度法是一种简便、快速、准确而有效的实验方法。     

Fractionation and purification of antioxidant peptides from Chinese sturgeon (Acipenser sinensis) protein hydrolysates prepared using papain and alcalase 2.4L

Protein hydrolysates have the potential to be natural and safer sources of bioactive peptides. In this study, two proteases were used to hydrolyze Chinese sturgeon (Acipenser sinensis) protein, and the hydrolysates were then purified to yield antioxidant peptides. The degree of hydrolysis of 23.56 % and 18.14 % was obtained using papain and alcalase 2.4L, respectivly, and hydrolysates had 96.80 % and 87.24 % total amino acid content, respectivly. The papain hydrolysate (PH) and alcalase 2.4L hydrolysate (AH) showed good antioxidant activity against DPPH^? (IC₅₀ of 3.64 and 3.15 mg/mL) and ABTS^?+ (IC₅₀ of 1.92 and 1.58 mg/mL), respectively. The low-molecular-weight (<1000 Da) fraction of both hydrolysates demonstrated the highest antiradical activity (IC₅₀ of 2.59 and 2.31 mg/mL, DPPH) and (IC₅₀ of 1.54 and 1.36 mg/mL, ABTS), respectively. Nine peptides were separated from both hydrolysates using reverse phase high performance liquid chromatography (RP-HPLC). The IC₅₀ for ABTS^?+ scavenging activity of peptide P5 with valine, glycine and asparagine (MW of 282.13 Da) from PH, and peptide P3 with histidine, glycine and alanine (MW of 302.74 Da) from AH was 0.89 and 0.72 mg/mL, respectively. The fractions and purified peptides obtained from Chinese sturgeon hydrolysates could be utilized as natural antioxidant substitutes in pharmaceuticals and food products.     

Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blends

A series of PB-g-SAN impact modifiers with different ratio of PB to SAN ranging from 20.6/79.4 to 91.9/8.1 were synthesized by seeded emulsion polymerization. ABS blends were prepared by blending these PB-g-SAN impact modifiers and SAN resin. The rubber concentration of these ABS blends was kept at a constant value of 15 wt%. The influences of different impact modifier on the mechanical behavior and morphology of ABS blends have been investigated. The dynamic mechanical analysis on ABS blends shows that T_g of the rubbery phase shifts to a lower temperature, (tan δ)_max of the rubbery phase increases and then decreases with the increase of PB concentration in PB-g-SAN impact modifier. A uniform dispersion of rubber particles in the matrix can be observed when PB/SAN ratio in PB-g-SAN impact modifier is in the range from 20.6/79.4 to 71.7/28.3. When it exceeds 71.7/28.3, an agglomeration of rubber particles occurs. The mechanical tests indicate that the ABS blend, in which PB/SAN ratio in the impact modifier is 71.7/28.3, has the maximum impact strength and yield strength.     

Ligand effect in the synthesis of hyperbranched polymers via copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP)

Copper-catalyzed azide-alkyne cycloaddition polymerization (CuAACP) of AB₂ monomers demonstrated a chain-growth mechanism without any external ligand because of the complexation of in situ formed triazole groups with Cu catalysts. In this study, we explored the use of various ligands that affected the polymerization kinetics to tune the polymers’ molecular weights and the degree of branching (DB). Eight ligands were studied, including polyethylene glycol monomethyl ether (PEG₃₅₀, M_n = 350), tris(benzyltriazolylmethyl)amine (TBTA), 2,6-bis(1-undecyl-1H-benzo[d]imidazol-2-yl)pyridine (Py(DBim)₂), 2,2′-bipyridyl (bpy), 4,4′-di-n-nonyl-2,2′-bipyridine (dNbpy), N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA), N,N,N′,N″,N″-penta(n-butyl)diethylenetriamine (PBuDETA), and N,N,N′,N″,N″-pentabenzyldiethylenetriamine (PBnDETA). All ligands except PEG₃₅₀ exhibited stronger coordination with Cu(I) than the polytriazole polymer, which freed the Cu catalyst from polymers and resulted in dominant step-growth polymerization with simultaneous chain-growth feature. Meanwhile, the use of PEG₃₅₀ ligand retained the confined Cu in the polymer, demonstrating a chain-growth mechanism, but lower polymer molecular weights as compared with the no-external-ligand polymerization. Results indicated that aliphatic substituent groups on ligands had little effect on the molecular weights and DB of the polymers, but rigid aromatic substituent groups decreased both values. By varying the ligand species and amounts, hyperbranched polymers with DB value ranging from 0.53 ([TBTA]₀/[Cu]₀ = 5) to 0.98 ([PMDETA]₀/[Cu]₀ = 2) have been achieved. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2238–2244     

Efcient Multipartite Polarization Entanglement Distribution Over Arbitrary Noise Channel

We present an efcient faithful multipartite polarization entanglement distribution protocol over an arbitrary noisy channel.The spatial degree of freedom is used to carry the entanglement during the transmission.We describe the principle by distributing n-qubit Greenberge–Horne–Zeilinger state and n-qubit W state.Our scheme can be used to distribute arbitrary n-qubit entangled states to n distant locations.The remote parties can obtain maximally entangled states deterministically on the polarization of photons.Only passive linear optics are employed in our setup,which makes our scheme more feasible and efcient for practical application in long distance quantum communication.     

Synthesis and properties of hyperbranched poly(ether sulfone)s prepared by self‐polycondensation of novel AB2 monomer

Hyperbranched poly(ether sulfone)s were prepared by the self‐polycondensation of the novel AB₂ monomer, 4‐(3,5‐hydroxyphenoxy)‐4′‐fluorodiphenylsulfone. The high‐molecular‐weight polymers were isolated in good yields. The degree of branching (DB) of the resulting polymers was investigated by the preparation of dendritic and linear model compounds. The DB determined by gated decoupling ¹³C NMR measurements was in the range 0.17–0.41 and was dependent on the base used for the self‐polycondensation. It was found that cesium fluoride was an effective base to form the polymer having the DB of 0.41. The resulting hyperbranched poly(ether sulfone)s showed good solubility in organic solvents. The solubility and the glass transition temperature of the polymers were influenced by the terminal functional groups. The unique thermal crosslinking phenomenon was observed during the DSC measurements of the hydroxyl‐terminated hyperbranched poly(ether sulfone) under air condition. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A class of finite groups with complete character degree graphs

In this paper, we construct a new class of finite groups whose common divisor graphs are complete graphs, while there is no prime dividing all the nontrivial degrees.     

不同光场二阶相干度的实验研究

基于Hanbury Brown-Twiss(HBT)实验,我们借助于两个单光子计数模块,一个50/50分束器和一个快速计数卡(FastCom-P7888)研究了不同光场的二阶相干度。我们首先制备了脉冲相干光,连续相干光以及单原子发出的单光子源,并测量这几种不同光场的二阶相干度g(2)(τ)。我们通过测量俘获在磁光阱(MOT)和远失谐偶极阱(FORT)中的单原子在近共振连续激光激发下所辐射的荧光的二阶相干度,分别得到了g(2)(τ=0)=0.08和g(2)(τ=0)=0.09,借助于实验中产生的脉冲光与单原子,接下来我们将进行触发式单光子源的实验研究。     

An object-parameter approach to predicting unknown data in incomplete fuzzy soft sets

Incomplete data in soft sets lead to uncertainty and inaccuracy in representing and handling information. This paper introduces notions of complete distance between two objects and relative dominance degree between two parameters. Based on both the notions, an object-parameter method is proposed to predict unknown data in incomplete fuzzy soft sets. The proposal makes full use of known data, including the information from the relationship between known values of all objects on a certain parameter and the information from the relationship between known values of an object on all parameters. The effectiveness of the proposal is verified by many examples under the compared investigation of classical predicted methods.     

Erratum: The average degree of an edge-chromatic critical graph II

In the article “The average degree of an edge-chromatic critical graph II” by Douglas R. Woodall (J. Graph Theory 56 (2007), 194-218), it was claimed that the average degree of an edge-chromatic critical graph with maximum degree $\mathrm{\Delta }$ is at least $\text{◂⋅▸}\frac{2}{3}\left(\mathrm{\Delta }+1\right)$ if $\mathrm{\Delta }⩾2$, at least $\text{◂+▸}\frac{2}{3}\mathrm{\Delta }+1$ if $\mathrm{\Delta }⩾8$, and at least $\text{◂⋅▸}\frac{2}{3}\left(\mathrm{\Delta }+2\right)$ if $\mathrm{\Delta }⩾15$. Unfortunately there were mistakes in the proof of the last two of these results, which are now proved only if $\mathrm{\Delta }⩾18$ and $\mathrm{\Delta }⩾30$, respectively.